Bridgestone Select - Prince Tyres - Articles

Tyre alignment, also known as wheel alignment, can help your tyres perform properly and help them last longer. It can also improve handling and prevent your vehicle from pulling in one direction or vibrating strangely on the road.

WHAT IS TYRE ALIGNMENT?

Alignment refers to an adjustment of a vehicle’s suspension – the system that connects a vehicle to its wheels. It is not an adjustment of the tyres or wheels itself. The key to proper alignment is adjusting the angles of the tyres which affects how they make contact with the road.

HOW DO I KNOW IF I NEED A TYRE ALIGNMENT?

There are a couple ways to tell if your car needs a tyre alignment. If you've noticed one or more of these indicators, you should have your alignment checked by a licensed service technician immediately. 

• ·Uneven tread wear
• Vehicle pulling to the left or right
• Your steering wheel is off centre when driving straight
• Steering wheel vibration

CAMBER, TOE, & CASTER

When a technician checks your tyre alignment, he or she is mainly concerned with three things:

1. CAMBER - This is the inward or outward angle of the tyre when viewed from the front of the vehicle. Too much inward or outward tilt, also known as negative and positive camber, respectively, indicates improper alignment and will need to be adjusted. Worn bearings, ball joints, and other wheel-suspension parts may contribute to camber misalignment.
2. Toe - Distinct from camber alignment, toe alignment is the extent to which your tyres turn inward or outward when viewed from above. If that’s confusing, just stand up and look down at your feet. Angle them inward toward the centre of your body. When the tyres on your car are angled the same way (remember, we’re thinking in terms of bird's-eye view), we call this toe-in alignment. Angle your feet outward and you have toe-out alignment. Both require adjustment.
3. Caster - Your caster angle helps balance steering, stability, and cornering. Specifically, it’s the angle of your steering axis when viewed from the side of your vehicle. If you have positive caster, the steering axis will tilt toward the driver. Negative caster, on the other hand, means the steering axis tilts toward the front of your vehicle.

WHY TYRE ALIGNMENT MATTERS

Improper wheel or tyre alignment can cause your tyres to wear unevenly and prematurely. Here are some specific types of undue tread wear attributable to misalignment:

FEATHERING

Tyres are “feathered” when the tread is smooth on one side and sharp on another. This is usually a sign of poor toe alignment.

CAMBER WEAR

This strain of tread wear means the inside or outside of the tread is significantly more worn than the centre of the tread. As its name implies, positive or negative camber causes this type of wear.

HEEL/TOE WEAR

This happens when one side of your tread blocks wears down more quickly than the other in a circumferential direction. When you run your hand over the tread, it will look and feel like saw teeth when viewed from the side. Heel/toe wear could be a sign of under inflation and/or lack of rotation.

If you’re experiencing any of these unusual wear patterns, you should have a technician check your alignment. While tyre wear prevention is a good reason to keep your wheel alignment in check, the consequences of misalignment can also play out in overall vehicle performance. A car that pulls to one side or steers erratically, for example, probably has an alignment problem.

TYRE BALANCING

Distinct from tyre alignment, tyre or wheel balancing refers to compensation for any weight imbalances in the tyre/wheel combination and is often performed in conjunction with wheel alignment. There are two basic types of tyre/wheel imbalance that need correction – static (single plane) and dynamic (dual plane).

Static balance addresses balance on only one plane – vertical movement which can cause vibration. A dynamic imbalance, on the other hand, addresses balance in two planes – vertical movement and lateral movement. Both types of imbalance require the use of a special balancing machine to help even things out.

To begin balancing your tyres, a technician will mount them on the correct rims and adjust the pressure to optimal inflation. Then each tyre goes on the centre bore of a balancing machine. The machine spins the tyre at a high speed to measure the wheel/tyre combination imbalance. It signals how much weight the technician should add to balance out the tyre and the areas where said weight is needed.

Tyre balancing is essential for proper tyre care for the same reason as wheel alignment: prevention of premature tread wear. Having tyres aligned and balanced every 10,000 kilometres can help maximise their lifespan and overall performance.